Instructions for Compo Body Builder

 
 

COMPO BODY BUILDER is for use as a filler for deep crazing and large cracks. It is also great for building up missing parts of your doll such as fingers and toes etc.

 

Please read all instructions before you begin!

 

All dolls should be clean and dry before using COMPO BODY BUILDER For best results we recommend cleaning your doll first, with our DOLL CLEANING SOLUTION using a clean thin cloth (t-shirt material works great).

 

TO USE COMPO BODY BUILDER AS A FILLER take a small amount on your fingertip (if preferred use a latex glove) and rub it into the cracks. You may need to apply several times for deep cracks allowing to dry between applications. Remove excess from surface with a damp cloth before it dries. When COMPO BODY BUILDER is completely dry (8-12hrs) you may apply COMPO CRAZE CONCEALER as per instructions, then buff concealer to return luster to filled areas (if desired).

 

NOTE: When using COMPO CRAZE CONCEALER over large filled surfaces try to match the surface color as close as possible ( this may require mixing concealer colors). Also note: concealer darkens when it is buffed.

 

TO USE COMPO BODY BUILDER AS A BUILDER on a small part such as a toe, using your finger take an appropriate amount of COMPO BODY BUILDER to reproduce missing part. Attach it to the doll and shape it as desired (you do not need to use any wires or pins, the product is very hard when dry). Allow piece to dry for 24 hrs before handling. For building up larger missing parts such as a hand or foot, you will need to build it up in layers, adding a layer every 24 hrs until the piece is formed. Try to shape each layer as you go for best results. When the part is fully dry (24 hrs after final application) you may lightly sand until smooth. If desired you may apply a thin coat of COMPO CRAZE CONCEALER over the new piece, then buff(see above note).

 

CLEAN UP: Wash your hands with warm water before the Body Builder dries. Replace lid tightly when not in use. Do not freeze.

 

FIRST AID: In case of eye contact, flush eyes with water for 10 minutes.

**KEEP OUT OF REACH OF CHILDREN**